power: 130 watt/m2, 65 wat/m
recommended for additional heating and for very good thermal insulated rooms
width: 50 cm
tickness: 0.338 mm
color: milk white

power: 160 watt/m2, 80 watt/m
recommended for additional heating and for very good thermal insulated rooms
width: 50 cm
tickness: 0.338 mm
color: milk white

power: 220 watt/m2, 55 watt/m
usage: indicated for tight spaces heating
width: 25 cm
tickness: 0.338 mm
color: transparent

power: 160 watt/m2, 40 watt/m
recommended for additional heating and for narrow surfaces
width: 25 cm
tickness: 0.338 mm
color: milk white

power: 220 watt/m2, 67 watt/m
usage: indicated for tight spaces heating
width: 30 cm
tickness: 0.275 mm
color: milky white

power: 220 watt/m2, 110 watt/m
usage: floor, wall and ceiling heating
width: 50 cm
tickness:: 0.338 mm
color: milky white

power: 220 watt/m2, 180 watt/m
usage: floor, wall and ceiling heating
width: 80 cm
tickness: 0.338 mm
color: milky white

power: 220 watt/m2, 220 watt/m
usage: floor, wall and ceiling heating – is cost saving, ideal for large areas
width: 100 cm
tickness: 0.338 mm
color: milky white

power: 400 watt/m2, 200 watt/m
usage: recommended for wall, ceiling heating and for infrared saunas
width: 50 cm
tickness: 0.275 mm
color PET: milky white

power: 220 watt/m2, 65 watt/m
usage It is used in any case where 220 volt power is not safe, and is feasible a low-voltage (12 V) power supply
width: 30 cm
tickness: 0.275 mm
color PET: milky white

power: 220 watt/m2, 65 watt/m
usage: in places where 220 volts can be dangerous however is available a 24-volt power supply
width: 30 cm
tickness: 0.275 mm
color PET: milky white

power: 220 watt/m2, 110 watt/m
recommended for floor heating
PTC properties - on higher heat demand places produces more heat
25% energy saving function
width: 50 cm
tickness: 0.338 mm
color: milk white

power: 220 watt/m2, 110 watt/m
recommended for floor heating
PTC properties - on higher heat demand places produce more heat
increased mechanical and thermal resistance
25 % energy saving effect
width: 50 cm
thickness: 0.4 mm
color: Gold & Black, glossy

aplication: electricity supply to heating rail
lenght: 30 mm
diameter: 3.5 mm
material: chrome plated copper

is used to isolate the electrical connections for heating rail
diameter: 6 mm
features: 600 V; 125° C

Aplication: electricity supply to heating film.

Aplication: combination of pressed terminal and heating film.

display touch screen – black
WIFI function
max capacity: 16A/250V (WE)
input voltage: 230Vac 50/60HZ
range of temp: 5~35°C
size: 86x86x27 mm
display accuracy：0.5°C

WIFI function
display touch screen – white
max capacity: 16A/250V (WE)
input voltage: 230Vac 50/60HZ
range of temp: 5~35°C
size: 86x86x27 mm
display accuracy： 0.5°C

WIFI function
buttons – white
max capacity: 16A/250V (WE)
input voltage: 230Vac 50/60HZ
range of temp: 5~35°C
size: 86x86x27 mm
display accuracy： 0.5°C

The NTC external sensor help us to determine the heating temperature of the film at any time and also to control it, regardless of the room temperature.

Special Insulation Tape is used to isolate the electrical connections for heating film.

recommended for insulation along the cut for LUXURY and OVERALL film
width: 50 cm
length: 0.5 mm
color: black

Aplication: for heating film and terminals.

This puncher is used for the installation of Hot-Film, providing electrical connection between heating film and eyelet terminals.

usage: for electrical underfloor heating systems as power supply, especially under concrete
outer protective sheath is insulated rubber tube
copper electric wire diameter = 2 mm
outer diameter = 5 mm